Set 3M Vehicle Marking Sheets 3410

2 sheets or 4 sheets •• various sizes •• directions: left-hand or right-hand •• Standards: German DIN 30710, French TPESC-B

• Manufacturer: 3M^TM
• Design: self-adhesive
• Set options: 2 sheets of reflective film (1 left-hand, 1 right-hand) or 4 sheets of reflective film (2 left-hand, 2 right-hand)
• Available sizes:141 x 564mm, 141 x 423mm, 141 x 282mm, 141 x 141mm, 282 x 282mm or 282 x 423mm
• Standards: German DIN 30710
• Reflectivity class: RA2/C
• Colours: white and red

Vehicles for special purposes like removing snow, cleaning roads or disposing of waste should be highly visible on the road. Otherwise they can become a true safety hazard, especially when they are on duty in dim light conditions. Safety markings are an effective way to make cars be seen by other road users. Recently, 3M^TM has upgraded the popular reflective sheeting 3840WM, creating outstanding safety markings with even more great features.

Flexible and removable safety markings for commercial vehicles

The self-adhesive reflective film from 3M^TM has many new benefits to offer: At day, the contrasting stripes in brilliant white and red meet the eye immediately, while at night the microprismscast back incident light. The retroreflectivity performance has been graded RA2/C (intense) and ensures conspicuity when you are on duty.

What is special about the self-adhesive vehicle marking 3410 VWM?

The retroreflective film excels in flexibility. It is bendable and softer than before, so it easier to apply - even on curvy surfaces.

When required, the film can be removed with heat from vehicle surfaces. This can be very helpful when you are about to return your leased commercial vehicle, or if you would like to sell your own vehicle and you need it to look like new.

The film's manufacturer 3M^TM is known for its high-quality and elaborate products, and the self-adhesive safety marking 3410 VWM is good proof of that: Being hard-wearing and resistant to all weathers, corrosion, weak acids, salts and alkalies, the film is ideal for daily outdoor usage.

It fulfils the requirements of DIN 30710 and hence bears the marking "DIN 30710/3M" on its top layer.

3M^TM guarantees proper functioning for up to 3 years with regard to reflectivity value and colour if the handling and care instructions are followed correctly (for more information, please refer to the pdf documents).

Why choose the 3M^TM self-adhesive safety markings 3410 VWM

• edges have already been sealed on the long sides
• film is easy to apply and removable
• strong adhesive is solvent-free and therefore environmentally friendly
• meets the requirements of DIN 30710, DIN 6171 and DIN 67520

Note: The film is cut on the short sides, so these edges have not been sealed. We recommend sealing the edges with a designated edge sealing tape, e. g. 3M^TM Scotchcal 100-114.