3M Reflective Tape 4080 fluor

The 3M 4080 Diamond Grade was developed as a reflective film for traffic signs and also impresses as a reflective tape in other diverse areas of application.

Widths: 10 mm, 25 mm, 50 mm, 100 mm
Lengths: 5 m or 10 m
Reflectivity class: RA3/C
3M colours: fluor-lime (fluorescent yellow-green 4083), fluor-yellow (fluorescent yellow 4081), fluor-orange (fluorescent orange 4084)

Please note that, for production reasons, 5 mm and 10 mm wide tapes are only available as 10 m rolls.

Features of reflective tapes 3M 4080 fluor 

• Film thickness: 0.22 mm, rigid and not very flexible
• Bonding should be carried out at a minimum of +18 °C (material and ambient temperature), increased initial adhesion of the adhesive above 25 °C
• Weather-resistant, hard-wearing and durable
• permanently self-adhesive, suitable for flat surfaces made of e.g. aluminium, metal, plywood
• Edge sealing is recommended

Possible applications of the reflective tape 3M 4090 Diamond Grade
The reflective tape is suitable for various applications:
- Reflective target markings for sensor systems, e.g. light barriers (infrared, red light reflex light barriers), measurement technology and CNC controls
- Markings in outdoor areas, e.g. gate entrances, barriers, bollards, posts

Further information on 3M 4080 fluor reflective film can be found in the data sheets.
Important notes:
Please note that there may be a deviation in the reflective tape width of +/- 1 mm due to the production process.
The 3M logo is only printed at larger intervals inside the large roll. It is therefore possible that individual reflective tapes do not have a logo. However, you can recognise the authenticity of the film by its surface structure as shown in the photo.