Orafol ORALITE Reflective Tape 5930MFlex

The reflective tapes from Orafol ORALITE 5930MFlex are very well suited for bonding to round and curved surfaces.

Widths: 5 mm, 10 mm, 25 mm, 50 mm, 100 mm
Lengths: 5 m or 10 m
Reflectivity class: RA2/C
Colour: White

Features of Orafol ORALITE 5930MFlex reflective tapes

• Durability 5 years
• Film thickness: 0.26 mm (flexible, very well suited for curved and round surfaces, e.g. alignment poles, snow poles)
• The bonding temperature should be at least +10° C
• Resistant to corrosion and solvents
• Weatherproof and hard-wearing (scratch and impact resistant)
• resistant to extreme temperatures (-40° C to 82° C)
• especially for metal and polyolefin surfaces (plastics such as PE and PP)
• No edge sealing required
• fulfils DIN 67520, DIN 6171 and EN 12899-1

Possible uses of the Orafol ORALITE 5930MFlex reflective tape

The reflective tape is suitable for various applications, such as
- Markings in outdoor areas, e.g. snow poles and snow poles, barriers, bollards or posts
- Bonding on bicycles, trailers, pushchairs
- walking frames, walking sticks

The ORALITE 5930MFlex has metal-coated microprisms that reflect incident light very strongly. In rain, fog or darkness, the reflective film immediately lights up brightly when illuminated by a spotlight.
Further information on Orafol ORALITE 5930MFlex reflective film can be found in the data sheets.

Important notes:
Please note that there may be a deviation in the reflective tape width of +/- 1 mm due to the production process.
A watermark can be seen at regular intervals on the film, which proves the authenticity of the stamp film. Please note that the reflective tape may be cut in such a way that there is no watermark on the film strip in front of you.
The Orafol logo is only printed at larger intervals inside the large roll. It is therefore possible that individual reflective tapes do not have a logo. However, you can recognise the authenticity of the film by its surface structure as shown in the photo.